PSC Epoxy Systems provide the preservation of new concrete as well as of old debilitated concrete.

A variety of colors and finishes are available. PSC Epoxy Systems are easy to maintain and provide a solution for industrial flooring and general coatings problems.

PSC 2000 StoneSet is a two component, 100 % solids epoxy binder designed for interior applications of stone aggregate floors. PSC 2000 StoneSet may be mixed with aggregate like crushed stone, synthetic materials, quartz sand and aluminum oxide. It has excellent bond strength, bonding various aggregates together and to the substrate providing a floor with as vibrant colors and patterns that is limited only by the specific aggregate used. PSC 2000 StoneSet is approved by CFIA (Canadian Food Inspection Agency) for use in Registered Establishments handling and processing food stuffs.

PSC 2001 QuartzSet is a two component, 100 % solids epoxy binder designed for Interior applications of quartz aggregate floor systems, like PSC GraniteQuartz 122, and Industrial epoxy mortar floor systems, like GraniteShield 112. PSC 2001 can be used as binder for quartz aggregate, various grade of sand for epoxy mortar, synthetic materials, aluminum oxide and crushed walnut shells for dissipative floor systems.
PSC 2001 QuartzSet is approved by CFIA (Canadian Food Inspection Agency) for use in Registered Establishments handling and processing food stuffs.

PSC 2099 Bonding Primer is a clear, two component bonding agent for epoxy topcoats for application to smooth, dense surfaces, such as ceramic tile, stone, smooth concrete, densifyed concrete etc. Both components are precisely measured and packaged for on-site mixing and use.

PSC 2099 Bonding Primer is safe to use, its low odor and VOC compliant formula permits its use in occupied areas without concern and therefore it can be applied in the proximity of foodstuffs. The chemical action of PSC 2099 leaves no film and will not change the color of concrete and it is suitable for exterior or interior applications

PSC 2100 Epoxy Primer is water based two component epoxy primer that is a perfect priming solution for applications where low odor is a must during application and cure. The mixing ratio is 1 to 1 and both components are precisely measured for accurate on-site mixing. Pot life is 2 hours @ 20 C.

PSC 2102 WB EpoxyCoat is a tinted water based epoxy coating with excellent bond strength, good durability and low odor. .
PSC 2102 WB EpoxyCoat is approved be CFIA (Canadian Food Inspection Agency) for use in Registered Establishments handling and processing food stuffs.

PSC 2300 Industrial Epoxy is a two component, self leveling, 100 % solids tintable epoxy coating. It is a high build epoxy system designed for applications up to 20 mils. PSC 2300 Industrial Epoxy provides excellent, long lasting protection for concrete substrates in harsh industrial environments. By adding approved aggregate into PSC 2300 it will provide a slip resistant coating for areas requiring a slip resistant finish. It is an economical solution for large industrial applications and it is sustainable for the life of the floor. PSC 2300 is approved by CFIA (Canadian Food Inspection Agency) for use in Registered Establishments handling and processing food stuffs.

PSC 2301 ClearGuard is a self leveling, 100 % solids tintable epoxy coating. It is a high build epoxy coating system specifically designed for demanding (compressive strength 13,100 psi and tensile strength 8,200 psi) industrial and commercial applications. It has excellent heat and chemical resistance, including Skydrol and Hyjet airline break fluids.. PSC 2301 ClearGuard is approved by CFIA (Canadian Food Inspection Agency) for incidental contact in federally and provincially inspected meat and poultry plants.

PSC 2302 Flexible Epoxy is a two component, mix ratio 1 to 1, self leveling, 100 % solids tintable epoxy coating. It is a high build coating designed for applications up to 20 mils per coat.

PSC 2302 has excellent resistance to humidity and can be applied under high humidity conditions without creating a foggy surface. It has good flexibility, up to 80 %, impact resistance and thermal resistance. The surface of PSC 2302 Flexible Epoxy is self healing from minor scratches providing excellent abrasion resistance under the most demanding conditions.

PSC 2304 Exterior Epoxy is a two component, mix ratio 1 to 1, self leveling 100 % solids tintable epoxy coating. Both components are precisely measured and packaged for easy and accurate on-site mixing and use. It is a high build epoxy coating system designed for applications up to 20 mils per coat.

PSC 2304 has excellent resistance to humidity and can be applied under high humidity conditions without creating a foggy surface. It has good flexibility, up to 80 %, impact and abrasion resistance and thermal resistance. The surface of PSC 2304 Exterior Epoxy is self healing from minor scratches providing excellent abrasion resistance under most demanding conditions. It resists yellowing from UV exposure and is suitable for exterior or interior applications.

PSC 2306 Novolac LV is a two component, self-leveling 100 % solids epoxy coating. Both components are precisely measured and packaged for accurate on-site mixing and use. PSC 2306 is a high build epoxy coating system designed for applications up to 20 mils per coat and it can be applied in humid conditions without creating a foggy surface. It has excellent heat and outstanding chemical resistance particularly suited for harsh chemical environments.

PSC 2308 Green Concrete Epoxy Primer is a two component, self leveling, 100 % solids epoxy primer. It is formulated for applications on green, damp concrete, and can be applied as soon as concrete has cured enough that applicator can walk on it. PSC 2308 can be top coated immediately with all 100 % solids epoxy top coats manufactured by PSC. It has excellent adhesion and curing properties, 350 psi on damp, green concrete and 800 psi on dry concrete.